| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
ANOVA |
Surface Mount Transient Voltage Suppressors ● Optimized glass passivated chip ● Tj = 150 °C capability suitable for high reliability and automotive requirement ● 5000 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % ● Meet ISO 7637-2 load dump test |
|
|
|
|
Littelfuse |
TVS Diodes • For surface mounted applications to optimize board space • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ES |
|
|
|
|
UN Semiconductor |
Surface Mount Transient Voltage Suppressors |
|
|
|
|
SeCoS |
5000W Peak Power Surface Mount TVS Glass passivated chip 5000W peak pulse power capability with a 10/1000µ Low leakage Uni and Bidirectional unit Very fast response time Excellent clamping capability MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 rate flame retardant Terminals: |
|
|
|
|
ANOVA |
Surface Mount Transient Voltage Suppressors ● Glass passivated chip ● 3000 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % ● High reliability application and automotive grade AEC Q101 qualified ● Low leakage ● Uni and Bidirectional unit ● Excellent |
|
|
|
|
Semiware |
Surface Mount Transient Voltage Suppressors > Glass passivated chip > 5000 W peak pulse power capability with a > 10/1000 μs waveform, repeƟƟve rate (duty cycle):0.01 % > High reliability applicaƟon and automoƟve grade > AEC Q101 qualified > Low leakage > Uni and BidirecƟonal unit > Excellent c |
|
|
|
|
SEMITECH |
4000W Surface Mount Transient Voltage Suppressors l Peak power dissipation 4000W @10 x 1000 us Pulse l Low profile package. l Excellent clamping capability. l Typical IR less than 2uA when VBR above 12V. l Glass passivated junction. l Fast response time: typically less than 1.0ps from 0 Volts to BV |
|
|
|
|
Leiditech |
3000W Transient Voltage Suppressor Glass passivated or planar junction. Excellent clamping capability. Repetition rate (duty cycle): 0.01%. Typical IR less than 1μA above 10V. Low profile package and low inductance. 3000W peak pulse power capability at 10×1000μs waveform. |
|
|
|
|
Littelfuse |
Transient Voltage Suppression Diodes & Benefits ■ 5000W peak pulse power ■ Typical IR less than 5μA when capability at 10/1000μs VBR min>22V waveform, repetition rate (duty ■ High temperature to reflow cycles):0.01% soldering guaranteed: ■ SMD low profile surface 260°C/40sec m |
|
|
|
|
SOCAY |
Surface Mount Transient Voltage Suppressors u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetiti |
|
|
|
|
Brightking |
Transient Voltage Suppressors |
|
|
|
|
RFE |
SURFACE MOUNT TVS DIODE • Glass Passivated Chip Junction • Excellent clamping capability • Low inductance • Low profile package • Fast response time, typically less than 1ps from 0 volts to BV for unidirectional types • Typical IR less than 1 uA above 10V • Built-in strain |
|
|
|
|
ZEN ELECTRONIC |
TRANSIENT VOLTAGE SUPPRESSOR Voltage Range 5.0V - 170V 3000W Peak Pulse Power Dissipation For surface mounted applications Reliable low cost construction utilizing molded plastic technique Response Time is Typically < 1 ns Uni-direction, less than 5.0ns for Bi-direct |
|
|
|
|
Eris |
Transient Voltage Suppressors ‧Constructed with Glass Passivated Die ‧3000W peak pulse power Dissipation ‧Excellent clamping capability ‧Uni and Bidirectional unit ‧Very fast response time ‧Component in accordance to RoHS 2002/95/EC ‧AEC-Q101 Qualified Mechanical Data ‧Cases: DO |
|
|
|
|
PACELEADER |
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Glass passivated chip 3000 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time SMC/DO-214AB .108(2.75) .128(3.25) |
|
|
|
|
RUILON |
Transient Voltage Suppressors 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1% x VBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AB package 6. 3000W peak pulse capadility at 10×1000μs waveform, repetition rate (duty cycles):0.01 |
|
|
|
|
BOURNS |
Transient Voltage Suppressor Diode n RoHS compliant* and halogen free** n Surface mount SMC package n Standoff voltage: 5 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 °C x DT 5.0SMDJ Transient Voltage Suppressor Diod |
|
|
|
|
Littelfuse |
TVS Diodes • 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Recognized to UL 497B as an Isolated Loop Circuit Protector • DO214AB SMT package for minimized board space • Low profile package • Typical failure mod |
|
|
|
|
SeCoS |
TVS Available in uni-directional polarity only Excellent clamping capability and Fast response time Moisture sensitivity: level 1, per J-STD-020 5000W peak pulse power capability with a 10/1000µs waveform Component in accordance to RoHS 2002/95/EC and WE |
|
|
|
|
HUAAN |
3000W Transient Voltage Suppressor • For surface mounted applications in order to optimize board space • Reliable low cost construction utilizing molded plastic technique • Plastic material has UL flammability classification 94V-O • Typical IR less than 1uA above 10V • Fast respo |
|