DataSheet.in

PTS1206M डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Platinum SMD Flat Chip Temperature Sensor - Vishay

भाग संख्या PTS1206M
समारोह Platinum SMD Flat Chip Temperature Sensor
मैन्युफैक्चरर्स Vishay 
लोगो Vishay लोगो 
पूर्व दर्शन
1 Page
		
<?=PTS1206M?> डेटा पत्रक पीडीएफ

PTS1206M pdf
www.vishay.com
DIMENSIONS in millimeters
Tt
PTS AT
Vishay Beyschlag
W WT
H
Tb
L
DIMENSIONS AND MASS
TYPE
HL
PTS 0805
PTS 1206
0.45 + 0.1 / - 0.05
2.0 ± 0.1
0.55 ± 0.1
3.2 + 0.1 / - 0.2
W
1.25 ± 0.15
1.6 ± 0.15
SOLDER PAD DIMENSIONS in millimeters
WT
> 75 % of W
> 75 % of W
Tt
0.4 + 0.1 / - 0.2
0.5 ± 0.25
Tb
0.4 + 0.1 / - 0.2
0.5 ± 0.25
MASS
(mg)
4.6
9.2
GX
Y
Z
RECOMMENDED SOLDERPAD DIMENSIONS
TYPE
WAVE SOLDERING
GYX
PTS 0805 0.8 1.25 1.50
PTS 1206 1.4 1.5 1.9
Z
3.2
4.4
REFLOW SOLDERING
GYXZ
0.9 0.9 1.4 2.7
1.5 1.15 1.75 3.8
DESCRIPTION
A homogeneous film of platinum is deposited on a high
grade (AI2O3) ceramic substrate and conditioned to achieve
the correct temperature coefficient and stability. The
sensor-elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure matte tin on nickel
plating, the immunity against tin whisker growth has been
proven under extensive testing.
QUALITY
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual sensors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3.
STORAGE
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
ASSEMBLY
The Pt-sensors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC61760-1. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The use of potting resins in close contact
with the protective coating or terminations is not
recommended.
All products comply with the CEFIC-EECA-EICTA list of
legal restrictions on hazardous substances.
This includes full compatibility with the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The Pt-sensors are tested in accordance with
• IEC 60751
• IEC 60068 series
The Pt-sensors are qualified according to AEC-Q200.
Revision: 16-Jun-15
2 Document Number: 28899
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

विन्यास 5 पेज
डाउनलोड[ PTS1206M Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
PTS12066-60 Volt DC surface mount resettable PTC devicesCooper
Cooper
PTS1206Platinum SMD Flat Chip Temperature SensorVishay
Vishay


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English