DataSheet.in

EDGE737 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Per-Pin Precision Measurement Unit - Semtech Corporation

भाग संख्या EDGE737
समारोह Per-Pin Precision Measurement Unit
मैन्युफैक्चरर्स Semtech Corporation 
लोगो Semtech Corporation लोगो 
पूर्व दर्शन
1 Page
		
<?=EDGE737?> डेटा पत्रक पीडीएफ

EDGE737 pdf
Edge737
TEST AND MEASUREMENT PRODUCTS
Pin Description
Pin Name
VINP
IVIN
FORCE
SENSE
MODE SEL
RS1, RS2
I/V MIN
I/V MAX
DUT LTH
DUT GTL
PASS/FAIL*
DISABLE
HiZ
RA, RB,
RC, RD
I/V MONITOR
COMP1
COMP2
VCC
VEE
CA
CB
CAPI
GND
Pin #
20
Description
Analog voltage input which forces the output voltage at FORCE (FV/MI mode).
21 Analog voltage input which forces the output current at FORCE (FI/MV mode).
3 Analog output pin which forces current or voltage.
2 Analog input pin which senses voltage (typically connected to FORCE).
10 Digital input which determines whether the PMU is forcing voltage or forcing current.
9, 11
24
31
32
26
25
18
8
5, 16
19, 22
12
15
14
27
Digital inputs which select one of the four current ranges.
Analog input voltages which establish the lower and upper threshold level for the
measurement comparator.
Digital comparator open drain outputs that indicate the DUT measurement is less
than the upper threshold and greater than the lower threshold.
Digital output that indicates whether or not the monitored voltage is between the
comparator thresholds. Logic1 corresponds to a measurement that is between
comparator thresholds.
Digital input which places the digital comparator outputs a I/V MONITOR in high
impedance.
Digital input which places the FORCE output into high impedance.
External resistors corresponding to ranges A through D.
Analog voltage output that provides a real time monitor of either the measured
voltage or measured current level.
External compensation pins that require an external capacitor connected between
the two pins.
Positive analog power supply.
13, 30
1
23
7
Negative analog power supply.
External compensation pins that require an external capacitor connected between
the two pins.
External compensation pins that require an external capacitor connected to ground.
4 Ground.
Revision 5 / February 20, 2003
2
www .semtech.com

विन्यास 19 पेज
डाउनलोड[ EDGE737 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
EDGE737Per-Pin Precision Measurement UnitSemtech Corporation
Semtech Corporation


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English