DataSheet.in

IS25WP040 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - 1.8V SERIAL FLASH MEMORY - ISSI

भाग संख्या IS25WP040
समारोह 1.8V SERIAL FLASH MEMORY
मैन्युफैक्चरर्स ISSI 
लोगो ISSI लोगो 
पूर्व दर्शन
1 Page
		
<?=IS25WP040?> डेटा पत्रक पीडीएफ

IS25WP040 pdf
ADVANCED INFORMATION
IS25WP016/080/040/020
16/8/4/2MBIT
1.8V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI &
QUAD I/O QPI DTR INTERFACE
ADVANCED INFORMATION
FEATURES
Industry Standard Serial Interface
- IS25WP016: 16Mbit/2Mbyte
- IS25WP080: 8Mbit/1Mbyte
- IS25WP040: 4Mbit/512Kbyte
- IS25WP020: 2Mbit/256Kbyte
- 256 bytes per Programmable Page
- Supports standard SPI, Fast, Dual, Dual
I/O, Quad, Quad I/O, SPI DTR, Dual I/O
DTR, Quad I/O DTR, and QPI
- Supports Serial Flash Discoverable
Parameters (SFDP)
High Performance Serial Flash (SPI)
- 50MHz Normal and 133Mhz Fast Read
- 532 MHz equivalent QPI
- DTR (Dual Transfer Rate) up to 66MHz
- Selectable dummy cycles
- Configurable drive strength
- Supports SPI Modes 0 and 3
- More than 100,000 erase/program cycles
- More than 20-year data retention
Flexible & Efficient Memory Architecture
- Chip Erase with Uniform: Sector/Block
Erase (4K/32K/64Kbyte)
- Program 1 to 256 bytes per page
- Program/Erase Suspend & Resume
Efficient Read and Program modes
- Low Instruction Overhead Operations
- Continuous Read 8/16/32/64-Byte burst
- Selectable burst length
- QPI for reduced instruction overhead
- AutoBoot operation
Low Power with Wide Temp. Ranges
- Single 1.65V to 1.95V Voltage Supply
- 10 mA Active Read Current
- 8 µA Standby Current
- 1 µA Deep Power Down
- Temp Grades:
Extended: -40°C to +105°C
Extended+: -40°C to +125°C
Auto Grade: up to +125°C
Advanced Security Protection
- Software and Hardware Write Protection
- Power Supply lock protect
- 4x256-Byte dedicated security area
with user-lockable bits, (OTP) One
Time Programmable Memory
- 128 bit Unique ID for each device
Industry Standard Pin-out & Packages(1)
- JM =16-pin SOIC 300mil(3)
- JB = 8-pin SOIC 208mil
- JN = 8-pin SOIC 150mil
- JD = 8-pin TSSOP 150mil
- JV = 8-pin VVSOP 150mil
- JF = 8-pin VSOP 208mil
- JK = 8-contact WSON 6x5mm
- JT = 8-contact USON 4x3mm
- JU = 8-contact USON 2x3mm
- JG = 24-ball TFBGA 6x8mm
- JC = 8-ball WLCSP BGA 2x2.7mm(2)
- KGD (Call Factory)
Notes:
1. IS25WP016 (not available in JD, JV) and
IS25WP080/040 (not available in JM, JD, JV, JG) and
IS25WP020 (not available in JM, JF, JT, JG)
2. Call Factory for WLCSP package (only available for
IS25WP016) or other package options available
3. For the additional RESET# pin option, see the
Ordering Information
Integrated Silicon Solution, Inc.- www.issi.com
Rev. 00A
01/13/2015
2

विन्यास 30 पेज
डाउनलोड[ IS25WP040 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
IS25WP0401.8V SERIAL FLASH MEMORYISSI
ISSI
IS25WP040DSERIAL FLASH MEMORYISSI
ISSI


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English